The Bishop (directed by Prebendary "Chopper" Harris)

Some more guys for my Dragon/Lion Rampant retinue, these guys are Essex Miniatures from their Early Medieval 28mm range. Size-wise they fit nicely with early Perry sculpts for the Foundry Barons War range but they are a little less chunky, no problem using them in the same unit though. Nicely sculpted and easy to paint, if only they had a bit more variety in the poses they would be my ideal medieval range.

The fellow in the centre is Bishop Lennard de Brennan, brother of Robert and the financial muscle behind the household. Proudly displaying the cross of St Chad upon his surcoat he terrorizes the local population despite a tremendous fear of rabbits.

Lennard de Brennan daring the lads to kick him up the arse...

More next time...

Back to Rampant Lions...or maybe Dragons?

Well it has been a while since I last put fingers to keyboard, mainly because I haven't painted much and my interest has been swayed by a return to the Karate Dojo, leaving little time for wargames. However, I now have a goal; I need a 24pt retinue for later in the year when we shall be having a day of LR games with the estimable gentlemen of the Loose Association of Wargamers. With one eye on Dragon Rampant being published I decided to go for a pseudo-medieval feel, not fantasy enough to be out of place in Lion Rampant games and not rigidly historical either, allowing me to throw together any nice miniatures from the twelfth or thirteenth centuries. I didn't want to have to research lots of heraldry or paint intricate designs on shields either so I will be going for a very simple blue & white theme overall with a few different designs for the knights.

The retinue of Robert de Brennan

So far I have a few Foundry Baron's War miniatures, one packet of archers and one of spearmen in gambeson. These were originally Games Workshop releases intended for Warhammer armies, something that became the more fantastic Brettonians in later editions. They are beautiful, characterful sculpts by the Perry brothers and they are a nice old school size standing about 27mm from sole of foot to top of head. This makes them a good mix for Essex Miniatures, allowing me to field my armoured Bishop once again. I will paint up a few Essex archers and spearmen for comparison in the next few days.

Until next time...

Half a unit is better than nowt!

I managed to get half a unit of bondi assembled and painted in the last fortnight, alongside a minor excursion into huts. Well, half a Lion Rampant unit that is, they are only two men short of a point for Saga. One thing I can say about blogging, it certainly spurs you into painting things, just to have something to put on the blog instead of waffle. Well...alongside waffle in my case.

Gripping Beast plastic Bondi - charging to the front!

The bondi are made up from the Gripping Beast Dark Age Warriors plastic set, with additional bits such as heads, belt-pouches and seaxes taken from the spares in the Viking Hirdmen box. I am not as keen on these as the Hirdmen, the bodies tend towards a rather hunched look, unlike the generally upright Hirdmen. Another problem is that the shields don't fit into the hands of a couple of poses. The hand is held at the waist but the chest and hem of the tunic prevent the hand fitting behind the shield boss without major and rather ugly re-sculpting. This is largely unseen if the shield is glued onto the arm but it is a minor annoyance. Minor gripes aside, they paint up lovely and there are plenty of characterful options between the two boxes.

...and charging away again!

I did have a slight disaster with my talc/varnish mix, one of the bondi (probably the last one in the line for varnishing) ended up looking rather frosty but fortunately a light coating of GW Nuln Oil shader followed by a fresh coat of varnish did the trick.

Well, it is the Winter Solstice and I aim to be quite drunk for a few days so maybe there will be an update before the New Year, maybe not. In any case I will wish you all a Joyful Solstice, Merry Christmas and a Happy New Year in that order!

Viking Hirdmen for Lion Rampant (and maybe Saga)

Well, less waffle and more pics this time. I finished my first unit for my Viking army today, a unit of six Foot Men-at-Arms in Lion Rampant terms or a unit and a half of Hearthguard for Saga. This means that the two Men-at-Arms units I need for Lion Rampant will give me three points of Hearthguard for Saga, two birds, one stone.

Gripping Beast plastic Viking Hirdmen - Front View

As you can see they are Gripping Beast plastic Viking Hirdmen that I made up straight out of the box, with only minor adjustments to the way the arms fit. Some of the arms have a slight shoulder attached which looks a lot better if it is filed flat and any gap filled with liquid greenstuff (from Games Workshop) or just bunged up with gesso at the undercoating stage if I forget.

...and from the other side...

They were an absolute joy to put together, very few bits and they all fitted reasonably well. The separate shields were the best bit, one of my bugbears is cast on shields. While cast on shields are good for painting as they shadow all the bits you would otherwise have to paint, you can't just take out a bunch of shields and paint them when you have five minutes to spare. Plastic shields are also easier to attach after painting than separate metal shields, just scratch away a little paint and use polystyrene cement, wiggling until the melted plastic is fully mixed for a stronger bond.

...and my usual view of them on the table (hopefully!).

Overall I am very happy with the way they turned out, especially as I now have flat varnish again so it is on to my next unit, twelve Bondi to back them up. More next time.

Vikings in Lion Rampant

As well as the Wars of the Roses, I am interested in using Lion Rampant for games set in the early medieval period (or late dark ages if you prefer), specifically the period from around 950-1066 CE. The three main armies of this period for me are Vikings, English and Normans with a possible foray into Wales, Ireland and Scotland should it all go well. I am using the term Vikings to cover any Scandinavian group such as Danes, Norse and everywhere they settled, such as Ireland and the Danelaw. Not technically correct but everyone knows what you mean by Viking without going into details. The same goes for English covering both Saxon and later Anglo-Danish. All the units and rules are there in the book for this end of the period but they are not explicitly covered in the suggested army lists. This leaves a little work to do in order to field an army of vicious Vikings or steadfast Saxons.

So starting with the Northmen it is merely a matter of choosing how I want my little Danes and Norwegians to perform on the battlefield. In my (admittedly amateur) understanding of the subject, Viking armies can be broken down into the following broad divisions, excluding allies, for gaming purposes:

• Hirdmen – the more professional end of the spectrum including the leader (King, Jarl, Hersir etc.) and his bodyguard or just bands of seasoned warriors in helmets, chainmail hauberks, carrying a shield and using a spear, axe or sword. The backbone of any Viking army, probably available in reasonable numbers even in smaller warbands. I will depict the Hirdmen as Foot Men at Arms in my retinues.

• Bondi – less professional or merely less well-off types, usually sporting a helmet and shield and carrying a spear, with an axe or sword in reserve. These would probably be fairly numerous second-line troops in a large army and well represented in a typical Lion Rampant retinue. For me these are Foot Serjeants, with the ability to form schiltron depicting the shieldwall.

• Levy – thralls and paupers, told to bring a spear and shield and to try not to mess it up or run away. Not much used outside the homelands due to the logistics of moving large numbers of poor troops but could be applicable to a Viking vs Viking game or one set in the borders of the Danelaw. Probably best represented as Serfs.

Which is all easily translated into Lion Rampant units but lacks a little flavour. To these I would add a couple of other types:

• Raiders, youths and other enthusiastic types – not even remotely trained in forming shieldwalls, battlefield tactics or restraint. These are the expendable first few off the boats or into the fray, possibly including the odd berserker or two and a lot of nobodies trying to make a name for themselves. These obviously lend themselves to Fierce Foot in Lion Rampant terms.

• Missile troops – not as numerous or as well formed as in Norman armies but could be found among the Bondi, sporting either javelins or bows to harass the enemy and keep their heads down. The lesser classes of missile troops in Lion Rampant are best represented by Bidowers with bows, javelins or a mix of the two.

So they are my five preferred troop types for my Viking armies. Fortunately Dan Mersey has posted his own idea for a Viking army on Boardgame Geek (http://boardgamegeek.com/thread/1223593/1066-retinues) where he gives his 24pt Viking army as:

2 Foot Men-at-Arms* @ 12 points
2 Foot Serjeants @ 8 points
1 Fierce Foot @ 4 points

This translates as 12 Hirdmen, 24 Bondi and 12 Raiders in my own terms. The Hirdmen and Bondi are easily put together using a box each of Viking Hirdmen and Dark Age Warriors that I bought from Gripping Beast for use with Saga. I am not sure how I am going to represent the Raiders yet, they may be best served by using more dynamic poses in metal. Now all I need to do is paint all these plastic Vikings up! Pictures soon.

The Beginning

Earlier this year I had all but given up wargaming in favour of Subbuteo (see my other blog Snapped off at the ankles for more). However I had forgotten that I had a copy of Dan Mersey's "Lion Rampant" on Amazon pre-order. When the package dropped through the letterbox I was ready to put it straight up on eBay but I spent half an hour leafing through it and by the end of that brief read through I was convinced that I was going to give it a try.

For those that have yet to encounter Lion Rampant, it is a very fast play, cinematic set of rules. By cinematic I mean that they capture the dramatic flavour of medieval warfare as told in the romances of troubadours and the movies rather than the grim reality of peasants dying knee deep in dysentery. The rules work with most basing systems including my favourite GW-style (20mm square infantry and 25x50mm cavalry) and only use six-sided dice so my own preferences are pretty much catered for from the start. Units come in two sizes, 6 or 12 which makes finishing a unit achievable for even my ailing painting mojo. There are also fewer than half a dozen units in most standard sized armies which makes finishing an army far more likely for me than the 200+ figures needed for many rule sets. All told, I am excited by the possibilities of these rules for three main periods, The Norman Conquest, The Wars of the Roses (very topical since Dickie Three was found not too long ago) and Tolkienesque Fantasy, like GW used to do before they went spiky. The Norman Conquest and Fantasy will need some working out beforehand but it should be easily done.

I will probably not be updating this blog too regularly, just when I have something to say or to show but as my interest in wargaming returns I hope to add in a few other games and historical periods. For now I will leave you with some photographs of my first completed unit - a unit of Expert Foot Serjeants (Billmen) in the service of Lord Henry Grey of Codnor, the local big nob around here.

Billmen - Perry Miniatures plastic War of the Roses Infantry.

Same lot from the back showing the badge on the back of the few livery coats.

Well that is it for now, I'm off to paint some bowmen, or maybe some Vikings...